Concrete Arch Pipe Applications:
The following is a list of typical jobs where Cretex concrete arch pipe can be used to an advantage:
    Culverts under a low fill where head room is not adequate for circular pipe.
    Culverts in side ditches where depth of ditch is to be kept to a minimum.
    Sewers in shallow trenches where it becomes more economical to lay a single line of
        arch pipe than a multiple line of circular pipe. Also, the width of trench is less, thus
        reducing the cost of excavation.
    Culverts in irrigation ditches where shallow water depth is essential.
Strength:
Pipe is built in accordance with ASTM Specifications C506. Standard designs are built to meet all modern traffic loads.
Economy:
A single Cretex concrete arch pipe can replace two circular concrete pipes to give equal or greater carrying capacity at less cost. For example, a 51" span by 31" rise arch pipe when flowing full will more than equal the capacity of two 30" circular pipe flowing full.
Joints:
A smooth flowline is assured with the easily installed tongue and groove joints. Joint sealing is readily obtained with flexible joint compound.
Appurtenances:
Flared end sections provide maintenance free, hydraulically functional inlet and outlet structures for arch culverts. Bends, tees and other special shapes can be fabricated to any special job requirements.

Download this page in the following formats
AutoCAD r14	Acrobat 3.01

Copyright © 1999 The Cretex Companies, Inc.. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.